킬스위치 추가 하실거면 킬스위치 옵션을 꼭 선택해주세요

2픽업 4노브 1스위치 구성의 TRICKFISHAMPS사의 FLEXCORE 프리앰프 입니다

9-18v

포텐셔미터에 끼우는

노브는 포함되어 있지 않습니다.(별도 구매 하셔야 합니다)

설명서는 쇼핑몰 자료실에 있습니다

Mike Pope Flexcore 2stk.1stk 2-Pickup 5-Knob 1-Switch 4-Band 

Vol/Tone Stack - Bl - Treb - Lo Mid/Hi Mid Stack - Bass - A/P Sw,  험싱전환스위치, 킬스위치( 15$   블랙 스위치 옵션 추가됨)

(5knob 3스위치(액티브/패시브)로 구성으로된

펜더디럭스, 라크랜드, 스펙터 등 액티브형에 스위치 홀이 있는 건전지가 들어가는 베이스에 장착하기 알맞는 상품입니다.

기본재즈형 베이스, 펜더 스탠다드는 컨트롤부 홀가공과 스위치가 없는 베이스는 스위치 홀가공이 필요합니다.

장착하기전 컨트롤부 쉴드 작업을 같이 해주시는게 좋습니다.)

포데라 베이스에 들어가는 베이스 프리앰프로도 널리 알려진

플렉스코어(FLEX CORE) 프리앰프로 여러분이 원하는 사운드 그 이상으로 업그레이드!!

이제 한국 공식 총판 베이스고수샵에서 만나보세요

EMG 픽업과 AERO 픽업과 같이 장착 하면 더욱 훌륭한 사운드를 내어 줄 것입니다

메뉴얼링크

emg 픽업과 플렉스 코어 장착 영상입니다.

Michael Pope Preamps

Control Configuration

1. Volume/Passive Tone Stack
2. Blend
3. Treble
4. Lo Mid/Hi Mid Stack
5. Bass
6. Active/Passive Switch

The Mike Pope Flexcore is a 1 to 4-band preamp that is an extremely nimble and flexible preamp system capable of allowing the user to choose what control layout fits best for their bass. Originally found on high end boutique builds from Fodera these preamps are now available for use in whatever bass you the player sees fit.

These preamps require a minumum control cavity depth of 1 1/4" and are intended for use with basses already equipped with a rear control route. They can be used with either Active pickups such as EMG®, Warwick® MEC, and passive pickups such as Bartolini, Nordstrand, Delano, Aguilar, and Seymour Duncan as well.

Tonally the preamps are clean, clear, and very transparent. The circuitry in the MPP preamps is designed to help, not harm. When you set the tone shaping controls flat there is no coloration or contour of the pickup's signal. Once installed the player can dial in tones anywhere from the up front in your face slap tones to a darker “What is Hip” finger style tones, and deep and hollow rock tones to an aggressive, Rickenbacker style edge. The circuit is there to help you without interjecting it's own personality. It's there to serve your needs.

Install is very simple and fully modular. Inputs for pickup connection, and grounds for instance is handled onboard with screw terminals as opposed to requiring soldering like other preamps.

The pot shafts are solid and can use knobs with set screws for install.Standard single potentiometer's require a single 6mm knob for use, and any concentric stack will require an 8mm lower, 6mm upper knob for use.

The preamp has provisions for 2 different frequency centers for each of its bass, lo-mid, hi-mid and treble controls with the bass and treble control selectable via included jumpers in the cavity and the mid frequencies selectable via jumpers or optional switches.

Technical Specifications

• Treble:+/- 15dB @ 6kHz or 10kHz
• Hi Mid:+/- 15dB @ 1kHz or 1.8kHz
• Lo Mid:+/-12dB @ 330Hz or 473Hz
• Bass:+/- 12dB @ 46Hz or 90Hz