Features:

• Low noise ampli er design with precise and smooth sound reproduction.

• High impedance input for direct ampli cation in passive instruments.

• 0,1% precision metal lm resistors in the signal path with a resultant noise

  factor of up to 10 times lower than standard thick lm resistors.

• Low tolerance lm capacitors in the signal path featuring lowest distortion

  and superior linearity.

• Cermet trimming potentiometer for gain adjust

• Screw input terminals with marking for signal-input (red) and GND (black)

• The switched ground terminal GND provides to switch on an recent on-

  board preamp or EQ.

• Completely shielded and encapsulated - no shielding inside the instru-

  ment required. 

  
  

  
  

  Technical Data:

  • Input Impedance: 1MΩ
  • Headphone Output Inpedance: ≥ 32 Ω,

  - recommended 80 Ω
  • Frequency Range: 10 Hz to 30 kHz, -3dB • Supply Voltage: 9V to 18V
  • Current Consumption: 3,6 mA
  • Gain: 1 to 5 via trim pot.
  • Weight: 15 g
  • Dimensions: L 20 x W 20 x H 24 mm
  • Reverse Polarity Protection
  • Input screw terminals